Door access control keypad 125 kHz IC/ID card
125khz RFID card access control keypad wiegand 26 access controller entry and exit Double frequency card door control

This is a powerful stand-alone access control machine: traditional switch-type buttons, you can set the valid period, can be

into service automatically (the authorized user card does not require the presence of personnel), you can set up a super management card (the

management card can obtain authorization at the same time, user card, one-time deletion of the user card, deletion of the operation of all

users), disassembly alarm output, two-way delay output, waterproof surface.

"Set Trial Period" is a function specially created for engineering business partners: after the installation of the system project, if

necessary, you can directly enter a set of codes on the access control. After about 32 days, the system will automatically go into status

Eve. Out of order. You need to enter the code to release the sleep state.

For the convenience of customers who do not need to use the password keypad, the management card can be set directly on the circuit board.

The specific operations are as follows: in standby mode, short 2, 3 of J3 in the lower left corner of the circuit board, then read a card.

This card is the new management card.

The automatic service function can realize that it is not necessary to retrieve the user card when changing the access control system.

The surface of this all-in-one machine has good water resistance. If installed outdoors, it can be fully waterproofed by applying glue to

glass around the back panel of the host.

1- 16000 card capacity, one password;

2- Support card, card or password, card and password to open the door;

3- automatic service function, can read all cards and save all cards read;

4- can set 32 days as working days, after 32 days, need to reactivate;

5- can set management card to add or delete user card;

6- can work as a slave drive, can connect a slave drive

7- Surface Waterproofed

Specifications:

1- user: 16000, one password

2- working voltage: DC 12V ± 10%

3- working current:<100mA

4- keyboard: press, no backlight

5- card type: 125khz (standard)

6- support card, password, card + password to open the door

7- Wiegand:Wiegand 26 input and output

8- size: 107mmx77mmx20mm