4-Button 433 MHz Remote Control for Garage Doors and Automatic Gates – Compatible with Pujol, MG, and ACM Standard

4-Button 433 MHz Remote Control for Garage Doors and Automatic Gates – Compatible with Pujol, MG, and ACM Standard

This 4-button, 433.92 MHz rolling code remote control is designed to replace or supplement remotes for a wide range of gate, garage door, motorized shutter, and automation systems.

It serves as a replacement for several remotes in the ATA PTX5 / Tri-Tran family; however, its main advantage is its broad compatibility with many receiver boards used in Algeria—specifically certain PUJOL, MG, and ACM Standard boards, as well as various other 433.92 MHz control boards available on the Algerian market.

Broad compatibility

The remote is designed to be compatible with:

ATA PTX5 / Tri-Tran
ATA PTX-5V1
ATA PTX-5V2
BND / B&D TB4
BND / B&D TB5V2
B&D GDO 11V1
B&D GDO 6V3
B&D GDO 6V4
B&D GDO 7V2
Certain PUJOL 433.92 MHz control boards
Several MG 433.92 MHz boards
ACM Standard compatible units
Various other 433.92 MHz receiver and control boards commonly sold in Algeria
Important note: The 433.92 MHz frequency alone does not guarantee compatibility. The receiver board must also use a protocol or encoding system compatible with this remote. It is recommended to check the model number of the board or the old remote before purchasing. Technical Specifications

Feature    Detail
Type    Gate / garage door remote control
Frequency    433.92 MHz
Technology    Rolling code
Number of buttons    4
Number of channels    Up to 4 functions, depending on the receiver
Programming    Pairing with the receiver / control board
Indicator    LED indicator
Format    Compact remote with key ring loop
Color    Black
Usage    Gate, garage, automation systems, motorized shutters, etc.
4 buttons for multiple controls

The 4 independent buttons allow you to control multiple automation systems or functions, depending on the receiver board configuration. For example: opening a gate, opening a garage door, operating a second gate, or an auxiliary control.

Especially suited to the Algerian market

A key advantage of this model is that it is not limited to original ATA/B&D motor systems. It can also be used with various universal or replacement boards installed on automation systems in Algeria, including compatible PUJOL, MG, and ACM Standard models.

This makes it a practical solution if an old remote is lost or damaged, or if you wish to add an extra remote without replacing the entire system.

Programming

Registration is generally performed directly via the LEARN / PROG / MEMO button on the receiver board, followed by pressing the desired button on the new remote. The exact procedure depends on the specific electronic board being used.

Tip before ordering: If in doubt, simply send us a photo of your old remote and a photo of the electronic board/receiver so we can verify compatibility.