4k 300M HDMI Extender IP KVM Signal Amplifier Over RJ45 Ethernet Cable

4k 300M HDMI Extender IP KVM Signal Amplifier Over RJ45 Ethernet Cable

Introduction:
The 300M HDMI IP Extender is based on the TCP/IP standard. It transmits your high-resolution HD display up to 300 meters from your DVD or computer source using a CAT5e/6 cable.
At the same time, it is convenient for transmitting HDMI audio and video sources in point-to-point, point-to-multipoint, multipoint-to-multipoint, and cascade modes.

Features:
* Supports HDCP1.4
* MJPEG decoding mode

* Supports point-to-point, point-to-multipoint, multipoint-to-multipoint, and cascade modes;
* 802.3 Ethernet standard;
* Pure hardware design, plug and play, no additional software required.

Specifications:
Resolutions.......... 480P/720P/1080P
Audio............Sampling Rates: 32 kHz, 44.1 kHz, and 48 kHz
Power Adapter Format.........AC Input (50Hz, 60Hz) 100V-240V; Output: DC5V/1A
Maximum operating current........TX 450mA, RX 400mA
Size (L-W-H)........90*91*19mm
Weight.........120g x 2
Operating temperature/humidity........0℃-45℃/10%-80%RH (no condensation)
Storage temperature/humidity..........-10℃-70℃/5%-90%RH (no condensation)

Warm tips:

Qualified Cat6 cables are required.
Please use qualified Cat6 T-568B cables to connect the TX and RX. A qualified network cable must be made of copper conductors.
The transmission distance is subject to the distance of the connected cables. The cable length cannot be less than 5 meters.

KVM Features:
KVM = Keyboard, Video, Mouse

The "Receive" USB interface only supports the connection of a wired USB mouse and 104 standard wired keyboards.

Contents: (for TX and RX)

1 x Transmitter

1 x Receiver
1 x USB Cable

2 x 5V Power Adapter

1 x Manual

Contents: (for 1 RX only)

1 x Receiver

1 x 5V Power Adapter