Menu
Your Cart

LAN Network Cable UTP Patch Cord CAT 6 (Class E) 1.5 m

LAN Network Cable UTP Patch Cord CAT 6 (Class E) 1.5 m
LAN Network Cable UTP Patch Cord CAT 6 (Class E) 1.5 m
New
LAN Network Cable UTP Patch Cord CAT 6 (Class E) 1.5 m
LAN Network Cable UTP Patch Cord CAT 6 (Class E) 1.5 m

LAN Network Cable UTP Patch Cord CAT 6 (Class E) 1.5 m

 

Patch cable for networking connections between devices. Prepared unshielded Twisted Pair cable with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Plugs with gold plated contacts. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 4-pair stranded wire.

For a structured cabling system we recommend to use the following components: VALUE Cat.6 UTP Cable, Solid Wire, AWG24, 300 m: 21.99.0995. VALUE Cat.6 Flush/Surface Mount Wall Jack, unshielded, white: 25.99.8494/25.99.8394; VALUE Cat.6 19" Patch Panel, 24 Ports, unshielded: 26.99.0351 (black), 26.99.0352 (grey); VALUE Cat.6 UTP Patch Cord, grey, 5 m: 21.99.0905. Our in-house laboratory has tested this cable-plug combination, in a Channel of 100 meters, in compliance with Class E specifications.

Specifications
Manufacturer    VALUE
Product group    Twisted Pair Cable
Product type    UTP Patch Cables
Colour    blue
Length    1.5 m
Shield type    UTP
Transfer quality    Cat6 / Class E
Impedance    100 Ohm
Quantity of wires    8
Conductor cross section (AWG)    AWG 24
Conductor type    Stranded
Crossed    no
Locking lever    no
Anti-kink sleeve    Moulded-on
Colour (Spout)    blue
Cable LSOH    no
Side 1 Connector Type    RJ-45
Side 1 Connector Gender    Male
Side 2 Connector Type    RJ-45
Side 2 Connector Gender    Male
Connector Type RJ45    Standard

 

Write a review

Note: HTML is not translated!
Bad Good
LAN Network Cable UTP Patch Cord CAT 6 (Class E) 1.5 m
250.00DA
  • Stock: 5
  • Model: UTP-CAT6E-1.5
Tags: lan , network , cable , utp , patch , cord , cat , 6 , class , e , 1 , 5 , m