NICE Mindy A01 Control Cabinet for Garage Door

NICE Mindy A01 Control Cabinet for Garage Door

Product Description

The NICE Mindy A01 control unit is an electronic control unit designed to operate 230V single-phase asynchronous motors equipped with mechanical limit switches. It is suitable for automating metal roller shutters, overhead garage doors, roller blinds, awnings, and certain gates. It integrates a 433.92 MHz radio receiver compatible with several NICE remote control families and allows for the management of local controls, safety features, and accessories.

Key Features

Compatible with 230V single-phase motors with mechanical limit switches
Integrated 433.92 MHz radio receiver
Compatible with NICE FLO, FLOR, and SMILO remote controls
Management of photocells and safety devices
Step-by-step push-button input (Open – Stop – Close – Stop)
24V DC accessory power output
Option to connect an external antenna
Compatible with the NICE TTBUS system
Simple programming via microswitches (DIP switches)
Technical Specifications

Feature Value
Brand: NICE
Model: Mindy A01
Type: Electronic control unit
Power supply: 230V AC – 50/60 Hz
Motor type: Single-phase 230V
Radio receiver: Integrated
Radio frequency: 433.92 MHz
Maximum number of remote controls: Up to 254
Accessory power supply: 24 DC voltage – 50 mA max
Safety input: STOP / Photocell
Step-by-step control input
Close input: Yes
Antenna connection: Yes
Compatibility: Curtains, garage doors, blinds, roller shutters
The programmable remote controls depend on the first registered transmitter and can belong to the FLO, FLOR, or SMILO families.

Terminal Connection Diagram

Terminals Function
1 – 2 – 3 – 4 Motor Connection (Close – Common – Open – Ground)
5 – 6 – 7 Mains Power Supply (Ground – Live – Neutral)
8 – 9 24 V DC Accessory Output
10 Safety Input (STOP / Photocell)
11 Step-by-Step Input (Open – Stop – Close – Stop) / TTBUS
12 Close Input
13 – 14 Radio Antenna
Terminals 8–9 supply power to low-voltage accessories (24 V DC), while terminals 10–12 are for controls and safety devices, with terminal 8 serving as the common for these inputs.

Schematic Diagram

230V Mains

│

┌────────────────────┐
│ NICE Mindy A01 │

└───────────────────┘

Terminals 5-6-7

Earth ────────────────┐
Live ────────────────┤

Neutral ───────────────┘

Terminals 1-2-3-4
Closed ──────────────┐
Common ──────────────┤──► Engine
Open ───────────────┤
Ground ──────────────┘

Terminals 8-9

24V DC ──────────────► Photocells / Accessories

Terminal 10
STOP / Photocell

Terminal 11
Step-by-Step Push Button

Terminal 12
Close Control

Terminals 13-14
433.92 MHz Antenna
Remote Control Pairing (Pairing)

Standard Method

Power on the control panel.
Open the control box.
Briefly press button T2 on the circuit board.
The radio LED will light up or flash to indicate learning mode.
Within 10 seconds, press the button on the remote control to be programmed.
The LED will confirm the pairing by flashing.
Repeat the operation for other remote controls if necessary.
The control panel can store up to 254 remote controls. The first transmitter registered determines the coding family (FLO, FLOR, or SMILO). If you wish to use a different technology, you must erase the memory before programming again.

Applications

Metal roller shutters
Up-and-over garage doors
Roller shutters
Motorized blinds
Gates equipped with a compatible single-phase motor
Package contents

1 × NICE Mindy A01 control unit
Installation instructions (depending on supplier)
Why choose the NICE Mindy A01?

The NICE Mindy A01 is a reliable and proven control unit for automating metal roller shutters and garage doors. Its integrated radio receiver, compatibility with NICE remote controls, safety inputs, 24V power supply for accessories, and simple programming make it an ideal solution for residential and commercial installations.