Wireless integration module for third-party sensors AJAX TRANSMITTER

Wireless integration module for third-party sensors AJAX TRANSMITTER

AJAX TRANSMITTER Wireless Integration Module for Third-Party Detectors

The device receives the detector activation signal through the wired input and sends an alarm to the hub. It converts third-party detectors into Ajax multifunction devices. It can be used as a power source for third-party devices.

It is protected by an accelerometer to detect disassembly and triggers an alarm if the detector connected to the module is opened.

One-Time Installation and Commissioning

It is installed in the outdoor detector housing or a mounting box.

Technical Specifications

Wireless
Installation Method: Indoor / Outdoor
Works with Hub, Hub Plus, ReX
Alarm Input: 1
Tamper Input: 1
Maximum Current Protection: No
Power Output: 3.3 V
Battery Charge Indication Function: Yes
Alarm Signal Reception Delay: 0.15 s
Power Supply:
- Three CR123A batteries
- Supply Voltage: 3 V
- Battery Life: Up to 5 years
Jeweler Radio Technology:
- Communication range with the central unit up to 1600 m in open space
- Two-way communication between devices
- Operating frequencies 868.0 868.6 MHz
- Self-adjusting RF output power up to 20 mW
- CrypVintage data packets based on the AES algorithm
- Period Detector interrogation time: 12,300 seconds
Anti-tamper: Tamper protection, jamming detection, accelerometer to detect disassembly
Temperature sensor: Available
Operating temperature range: -25° to +50°
Permissible humidity: Up to 75%
Remote adjustment and testing: +
Dimensions: 100x39x22mm
Weight: 74g